How to maintain and care for this long reach pruning shears to ensure its long-term use effect?

To ensure the long-term use effect of long reach pruning shears, the following are some specific maintenance and care suggestions:
Keep it clean: After using the pruning shears, the blades and other parts should be cleaned of branch residues, dust and impurities in time. These residues may affect the sharpness of the blades and the cutting effect of the pruning shears. Rinse the blade part of the pruning shears under running water to ensure that all residues are thoroughly removed. Gently wipe the blades and other metal parts with a clean cloth or paper towel to ensure that they are completely dry. This prevents moisture residue from causing rust or corrosion.
Lubrication maintenance: Choose a lubricant suitable for pruning shears, such as motor oil or professional mechanical lubricant. Make sure it will not corrode or damage the parts of the pruning shears. Regularly add lubricant to the sliding parts, gears and springs of the pruning shears. This ensures that they operate flexibly and reduce wear and resistance. Do not apply too much lubricant to prevent oil stains from accumulating on the blades and affecting the cutting effect. Just lightly apply a thin film of oil on key parts.
Blade maintenance: Check the sharpness and wear of the blades frequently. If you find that the blade is blunt or has a notch, you should take timely measures. If the blade is severely worn or damaged, you should replace it with a new blade in time. Choose a blade suitable for the pruning shears and make sure it matches the model and specifications of the pruning shears. When not in use for a long time, you can apply a layer of anti-rust oil or a special metal rust inhibitor on the blade. This can prevent the blade from rusting and maintain its sharpness.
Check screws and fasteners: Regularly check whether the various screws and fasteners of the pruning shears are loose or damaged. Pay special attention to the joints of key components such as the telescopic rod and the blade. If you find that the screws or fasteners are loose, you should use appropriate tools to tighten them in time. Make sure that all parts are firmly and reliably connected together.
Proper storage: Store the pruning shears in a dry, ventilated place to avoid damage caused by humidity and high temperature. Do not expose the pruning shears to direct sunlight to prevent the ultraviolet rays in the sunlight from accelerating its aging process. Do not leave the pruning shears in a humid basement or bathroom for a long time to prevent moisture from corroding its metal parts.
Avoid overuse: Although pruning shears are designed for long-term use, excessive use will still accelerate their wear and damage. Arrange the use time reasonably to avoid overheating or fatigue of the pruning shears due to long-term continuous use.
Follow the instructions for use: Read and follow the instructions and precautions of the pruning shears carefully to ensure the correct use and maintenance of the pruning shears. Do not exceed the use range and limit of the pruning shears to avoid damage to them.
By following the above maintenance and care recommendations, you can ensure the long-term use of the long-distance pruning shears, extend its service life, and provide better support for your pruning work.